Roll container
Shelf trolley
Platform trailer
Cab car
Mesh container
Postal delivery van
Collector
Stacking trolley
Kombix mesh shelving
Plastic container
Tractor drawbar
Platform trailer R6+ Mk II
Key Facts
SPURTREU
ROUTE TRAINABLE
WENDIG
ROBUST
ERGONOMIC
CAN BE DRIVEN ON GRADIENTS OF UP TO 5
Platform trailer R6+ Mk II
This platform trailer features the new Mk-II chassis and offers an innovative way of integrating an entrance to make loading and unloading more ergonomic.
The new swing axle also means that the trolley can be ramped. To enable optimum processes in production, the fixed castors can be folded up and thus allow easy crosswise movement by hand. Compared to the original R6+, straight-line speeds of up to 12 km/h are now possible and cornering stability is significantly increased.
BROLLS
If it is not coupled to another trolley, the fixed castors can be raised using the pedal and the trolley can now be moved freely and crosswise.
ADMISSION
There is a recess in the grid base at the side. This creates an entrance that makes it possible to get closer to the load and remove it ergonomically and safely.
FORKLIFT GUIDES
Thanks to the protected forklift guides, which can be fitted to the R6+ Mk II as an option, the trolley can be stacked on itself when empty. This is a great advantage, especially when transporting or storing trolleys. The trolley can also be loaded, e.g. lifted onto shelves or trucks.
RAMPABLE (UP TO 5°)
The two fixed castors in the middle of the trolley make it not only suitable for tugger trains, but also for ramps. When the drawbar is lowered to couple the trolleys, the fixed castors are automatically lowered to ensure constant contact with the ground. Thanks to its special design, the R6+ Mk II can be used on ramps with an angle of up to 5°.
PLATFORM TRUCK R6+ MK II
Item no. 469-1303
TECHNICAL DATA
DIMENSIONS (LxWxH):
– outside: approx. 2200 × 1310 × 1140 mm
– Usable area: approx. 2025 × 1225 mm
– Effective surface height: 290 mm
– Track width: approx. 895 mm
TRAGLAST:
– max. Total trolley payload:
500 kg (max. speed: 12 km/h)
– max. Total trolley payload:
1000 kg (max. speed: 6 km/h)
PROPERTIES:
– Conventional clutch/drawbar system
– R6+ Mk II chassis
– optionally stackable
ROLLING:
– 4 swivel castors with polyurethane tread
– 2 fixed castors with solid rubber tread
– 2 lockable castors
– Wheel diameter: 160 mm
– Running surface hardness: 92° Shore A / 65° Shore A
– Overrun protection on all swivel castors
COVERAGES:
– Mesh cover Mesh 30 × 30 mm
ACCESSORIES:
– with all-round upstand
– with removable push handle
– ESD-capable via rollers 10h7 Ohm
– Transport trolley lockable via
Central locking lever
– Forklift guides